Saw blade reduction ring from 30 mm to 25.4 mm - 1.8 mm
- for flat motors from KSx 58 - 63All product photos are non-binding examples! Technical changes reserved.
M25 cable gland brass, EMC-Z
- Suitable for shielded control cables up to 4 x 2.5 mm²
- for cables with a diameter of 7 mm to 13 mm
- Brass cable gland with low-resistance shield contact
- Highly conductive, flexible EMC contact spring
- Easy construction
M20 cable gland brass, EMC-Z
- Suitable for shielded control cables up to 4 x 2.5 mm²
- for cables with a diameter of 7 mm to 13 mm
- Brass cable gland with low-resistance shield contact
- Highly conductive, flexible EMC contact spring
- Easy construction
Compensating sleeve for a motor output shaft size 63 to 71
Diameter Ø=11 mm / 14 mm.
All product photos are non-binding examples! Technical changes reserved.
M32 cable gland brass, EMC-Z
- Suitable for shielded control cables up to 4 x 2.5 mm²
- for cables with a diameter of 7 mm to 13 mm
- Brass cable gland with low-resistance shield contact
- Highly conductive, flexible EMC contact spring
- Easy construction
Compensating sleeve for a motor output shaft of size 71 to 80
Diameter Ø= 14 mm / 19 mm.
All product photos are non-binding examples! Technical changes reserved.
Special flange for Electro motors the size 63
Flange B14 in big version.Ø120 x 80 x 100 mm, (P x N x M)screw thread= 4 x M6
The special flanges do not fit the motors in a reduced size!
! only surcharge in exchange - not available individually!
Special flange for Electro motors the size 71
Flange B5 in reduced version.Ø140 x 95 x 115 mm, (P x N x M)drilling= 4 x Ø10mm
The special flanges do not fit the motors in a reduced size!
! only surcharge in exchange - not available individually!
Special flange for Electro motors the size 71
Flange B14 in big version.Ø140 x 95 x 115 mm, (P x N x M)screw thread= 4 x M8
The special flanges do not fit the motors in a reduced size!
! only surcharge in exchange - not available individually!
Compensating sleeve for a motor output shaft of size 80 to 90
Diameter Ø= 19 mm / 24 mm.
All product photos are non-binding examples! Technical changes reserved.
Special flange for Electro motors the size 80
Flange B5 in reduced version.Ø160 x 110 x 130 mm, (P x N x M)drilling= 4 x Ø10mm
The special flanges do not fit the motors in a reduced size!
! only surcharge in exchange - not available individually!
Special flange for Electro motors the size 80
Flange B14 in big version.Ø160 x 110 x 130 mm, (P x N x M)screw thread= 4 x M8
The special flanges do not fit the motors in a reduced size!
! only surcharge in exchange - not available individually!
Special flange for Electro motors the size 90
Flange B14 in big version.Ø160 x 110 x 130 mm, (P x N x M)screw thread= 4 x M8
The special flanges do not fit the motors in a reduced size!
! only surcharge in exchange - not available individually!
Special flange for Electro motors the size 90
Flange B5 in reduced version.Ø160 x 110 x 130 mm, (P x N x M)drilling= 4 x Ø10mm
The special flanges do not fit the motors in a reduced size!
! only surcharge in exchange - not available individually!
