Motor switch (on-off) with electronic brake for 1.1 - 1.5 - 1.8 - 2.2 - 3.0kW
at 1x 230V, for external installation, cable length approx. 90cm,
Description:
- On / Off / Stop (0 - 1 / Stop) - Undervoltage trip/contactor - Electronic DC brake (motor brake) - Engine part protection via thermal sensor opener (PTO) - Protective contact plug 2P+ E, IP54, according to CEE7/VII, IP54 - with transparent PVC cover over on/off buttons - Add-on switch (closed switch version, wall or sheet metal mounting)
These motor switches are used for protection in woodworking machines against independent restart after voltage return.
The thermal sensor opener (PTO) must be present in the engine!
Motor switch (on-off) with electronic brake for 1.1 - 1.5 - 2.2 - 3.0 - 4.0 kW
at 3 x 400V, for external mounting, cable length approx. 90cm,
Description:
- On / Off / Stop (0 - 1 / Stop) - Undervoltage trip/contactor - Electronic DC brake (motor brake) - Engine part protection via thermal sensor opener (PTO) - CEE 16A 5-pin plug collar with phase inverter - with transparent PVC cover over on/off buttons - Add-on switch (closed switch version, wall or sheet metal mounting)
These motor switches are used for protection in woodworking machines against independent restart after voltage return.
The thermal sensor opener (PTO) must be present in the engine!
Motor switch (on-off) with electronic brake for 1.8kW,
at 1 x 230V, 11.1A, for external mounting, cable length approx. 90cm,
Description:
- On / Off / Stop (0 - 1 / Stop) - Undervoltage trip/contactor - Electronic DC brake (motor brake) - Overload protection trip (automatic reset) - Protective contact plug 2P+ E, IP54, according to CEE7/VII, IP54 - with transparent PVC cover over on/off buttons - Add-on switch (closed switch version, wall or sheet metal mounting)
These motor switches are used for protection in woodworking machines against independent restart after voltage return.
No external thermal sensor (PTO) necessary!
Motor switch (on-off) with electronic brake for 2.2kW,
at 1 x 230V, 13.2A, for external mounting, cable length approx. 90cm,
Description:
- On / Off / Stop (0 - 1 / Stop) - Undervoltage trip/contactor - Electronic DC brake (motor brake) - Overload protection trip (automatic reset) - Protective contact plug 2P+ E, IP54, according to CEE7/VII, IP54 - with transparent PVC cover over on/off buttons - Add-on switch (closed switch version, wall or sheet metal mounting)
These motor switches are used for protection in woodworking machines against independent restart after voltage return.
No external thermal sensor (PTO) necessary!
Motor switch (on-off) with electronic brake for 1.5kW,
at 1 x 230V, 9.51A, for external mounting, cable length approx. 90cm,
Description:
- On / Off / Stop (0 - 1 / Stop) - Undervoltage trip/contactor - Electronic DC brake (motor brake) - Overload protection trip (automatic reset) - Protective contact plug 2P+ E, IP54, according to CEE7/VII, IP54 - with transparent PVC cover over on/off buttons - Add-on switch (closed switch version, wall or sheet metal mounting)
These motor switches are used for protection in woodworking machines against independent restart after voltage return.
No external thermal sensor (PTO) necessary!
Motor switch (on-off) with electronic brake for 1.1kW
at 1 x 230V, 7.18A, for external mounting, cable length approx. 90cm,
Description:
- On / Off / Stop (0 - 1 / Stop) - Undervoltage trip/contactor - Electronic DC brake (motor brake) - Overload protection trip (automatic reset) - Protective contact plug 2P+ E, IP54, according to CEE7/VII, IP54 - with transparent PVC cover over on/off buttons - Add-on switch (closed switch version, wall or sheet metal mounting)
In woodworking machines, these motor switches are used to protect against autonomous operation
Restart after voltage return.
No external thermal sensor (PTO) necessary!
Motor switch (on-off) with electronic brake for 3.0kW,
at 3 x 400V, 6.73 A, for external mounting, cable length approx. 90cm,
Description:
- On / Off / Stop (0 - 1 / Stop) - Undervoltage trip/contactor - Electronic DC brake (motor brake) - Overload protection trip (automatic reset) - CEE 5-pole plug collar with phase inverter - with transparent PVC cover over on/off buttons - Add-on switch (closed switch version, wall or sheet metal mounting)
These motor switches are used for protection in woodworking machines against independent restart after voltage return.
No external thermal sensor (PTO) necessary!
Motor switch (on-off) with electronic brake for 1.5kW
at 3 x 400V, 3.41 A, for external mounting, cable length approx. 90cm,
Description:
- On / Off / Stop (0 - 1 / Stop) - Undervoltage trip/contactor - Electronic DC brake (motor brake) - Overload protection trip (automatic reset) - CEE 5-pole plug collar with phase inverter - with transparent PVC cover over on/off buttons - Add-on switch (closed switch version, wall or sheet metal mounting)
These motor switches are used for protection in woodworking machines against independent restart after voltage return.
No external thermal sensor (PTO) necessary!
Motor switch (on-off) with electronic brake for 2.2kW,
at 3 x 400V, 4.76A, for external mounting, cable length approx. 90cm,
Description:
- On / Off / Stop (0 - 1 / Stop) - Undervoltage trip/contactor - Electronic DC brake (motor brake) - Overload protection trip (automatic reset) - CEE 5-pole plug collar with phase inverter - with transparent PVC cover over on/off buttons - Add-on switch (closed switch version, wall or sheet metal mounting)
These motor switches are used for protection in woodworking machines against independent restart after voltage return.
No external thermal sensor (PTO) necessary!
Motor switch (on-off) with electronic brake for 4.0kW,
at 3 x 400V, 8.19 A, for external mounting, cable length approx. 90cm,
Description:
- On / Off / Stop (0 - 1 / Stop) - Undervoltage trip/contactor - Electronic DC brake (motor brake) - Overload protection trip (automatic reset) - CEE 5-pole plug collar with phase inverter - with transparent PVC cover over on/off buttons - Add-on switch (closed switch version, wall or sheet metal mounting)
These motor switches are used for protection in woodworking machines against independent restart after voltage return.
No external thermal sensor (PTO) necessary!
Motor switch (on-off) with electronic brake for 5.5kW and 7.5kW
at 3 x 400V, for external mounting, cable length approx. 90cm,
Description:
- On / Off / Stop (0 - 1 / Stop) - Undervoltage trip/contactor - Electronic DC brake (motor brake) - Engine part protection via thermal sensor opener (PTO) - CEE 5-pole plug collar with phase inverter - with transparent PVC cover over on/off buttons - Add-on switch (closed switch version, wall or sheet metal mounting)
These motor switches are used for protection in woodworking machines against independent restart after voltage return.
The thermal sensor opener (PTO) must be present in the engine!
Motor switch (on-off) with electronic brake for 5.5kW and 7.5kW,
at 3 x 400V, 10.5 to 16 A adjustable, for external mounting, cable length approx. 90cm,
Description:
- On / Off / Stop (0 - 1 / Stop) - Undervoltage trip/contactor - Electronic DC brake (motor brake) - Overload protection trip (automatic reset) - CEE 5-pole plug collar with phase inverter - with transparent PVC cover over on/off buttons - Add-on switch (closed switch version, wall or sheet metal mounting)
These motor switches are used for protection in woodworking machines against independent restart after voltage return.
No external thermal sensor (PTO) necessary!
