MV-273-112M - 4kW-75rpm Helical-Gear-Motor

€1,165.53*

Prices incl. VAT plus shipping costs

Delivery time Approx. 36 working days

Mounting position for gearmotors

Type of construction

Product number: A0273512100190A000TM

Shipping fees: Article + Packaging

Downloads

Product information "MV-273-112M - 4kW-75rpm Helical-Gear-Motor"

Helical geared motor (gearbox with IEC flange to the ac-motor),

Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.

Power= 4.0 kW, Speed= 75 rpm, Ratio (i)= 19, Torque (M²)= 492 Nm, Service factor (fs)= 0.9.

Type = B3 (B5 for an extra charge), Shaft = 35mm x 70mm, Weight= 56.5kg, Paint= RAL5010.

Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable).

The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008.

The gear motor can be operated in both directions and contains an oil filling on delivery.

According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by

qualified specialist personnel. For modifications or special designs please send inquiry.

All product photos are non-binding examples! Technical changes reserved.

When ordering, please select the desired mounting position and design!

Delivery time:	5-6 weeks
Performance:	4,0 kW
Rotation speed:	51 to 100 rpm
Series:	M-series
Shaft diameter:	35 mm
Torque:	401 to 500 Nm

Properties "MV-273-112M - 4kW-75rpm Helical-Gear-Motor"

Delivery time:	5-6 weeks
Performance:	4,0 kW
Rotation speed:	51 to 100 rpm
Series:	M-series
Shaft diameter:	35 mm
Torque:	401 to 500 Nm

Accesories

Frequency inverter LS 0037-iS7-4-SPFD

Frequency inverter iS7 – the all-rounder 3.7 kW, 3x400V, 8A, Braking resistor, EMC filter, IP54 , DC reactor, with control panel. ● Constant torque / variable torque for normal load and heavy load operation● U/f and U/f PG control, sensorless vector control, vector control with sensor selectable● 150 MIPS high-speed DSP● Excellent performance and advanced features:Droop control (torque control)KEB protection (Kinetic Energy Buffering: storage of kinetic energy) Ride Through protection(Delay of undervoltage trip) Under Load Trip ProtectionPMSM function (Permanent Magnet Synchronous Motor) Vector control without feedbackPower Braking & Flux Braking Function Automatic Setting:Autotuning of static engine parameters ● Easy to use:simple start mode, user and macro group, multifunctional control panel● Sensorless control and parameter setting of the second motor● Available: IP54/UL Type 12 optional (0.75~22kW[1~30HP]) *● Integrated communication RS485 (LS Bus / Modbus RTU)● Integrated transistor for dynamic braking (0.75~22kW[1~30PS])● Integrated EMC filter and DC reactor optional:EMC filter (0.75~22kW[1~30HP]) / DC reactor (0.75~160kW[1~215HP])● Wide, graphic LCD control panel (6 different languages)● PLC PLC expansion card optional (Programmable Logic Control Card):Master-K platform (max. 14 inputs and max. 7 outputs)● Input/Output expansion card (optional):max. 11 inputs and max. 6 outputs● Optional communication:Profibus DP, DeviceNet, Modbus TCP, Rnet, LonWorks, CANopen, EtherNet/IP *● Software (Drive View) for monitoring and parameterization on the PC

€926.96*

Details

Frequency Inverter LS 0040S100-4EOFNS

Frequency inverter, VFD, 4.0 kW, IP20, 380V- 400V- 420V- 480V, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

€437.27*

Details

Frequency inverter LS 0037-iS7-4-SOFD

Frequency inverter iS7 – the all-rounder 3.7 kW, 3x400V, 8A, Braking resistor, EMC filter, IP21 , DC reactor, with control panel. ● Constant torque / variable torque for normal load and heavy load operation● U/f and U/f PG control, sensorless vector control, vector control with sensor selectable● 150 MIPS high-speed DSP● Excellent performance and advanced features:Droop control (torque control)KEB protection (Kinetic Energy Buffering: storage of kinetic energy) Ride Through protection(Delay of undervoltage trip) Under Load Trip ProtectionPMSM function (Permanent Magnet Synchronous Motor) Vector control without feedbackPower Braking & Flux Braking Function Automatic Setting:Autotuning of static engine parameters ● Easy to use:simple start mode, user and macro group, multifunctional control panel● Sensorless control and parameter setting of the second motor● Available: IP54/UL Type 12 optional (0.75~22kW[1~30HP]) *● Integrated communication RS485 (LS Bus / Modbus RTU)● Integrated transistor for dynamic braking (0.75~22kW[1~30PS])● Integrated EMC filter and DC reactor optional:EMC filter (0.75~22kW[1~30HP]) / DC reactor (0.75~160kW[1~215HP])● Wide, graphic LCD control panel (6 different languages)● PLC PLC expansion card optional (Programmable Logic Control Card):Master-K platform (max. 14 inputs and max. 7 outputs)● Input/Output expansion card (optional):max. 11 inputs and max. 6 outputs● Optional communication:Profibus DP, DeviceNet, Modbus TCP, Rnet, LonWorks, CANopen, EtherNet/IP *● Software (Drive View) for monitoring and parameterization on the PC

€536.29*

Details

External fan unit size 112

External fan, External fan unit, Motor size 112 Isoclass F, Protection class IP56, Weight 3.7kg, Multivoltage. 1x230 V-50 Hz, 45 watts, 0.19 A, 2850 rpm, 229 m3/h, capacitor 3µF1x240 V-60 Hz, 65 watts, 0.28 A, 3350 rpm, 229 m3/h, capacitor 3µF3x230/400 V-50 Hz, 45 watts, 0.19 A/0.12 A, 2850 rpm, 229 m3/h3x 254/460 V-60 Hz, 70 watts, 0.21/0.12 A, 3300 rpm, 229 m3/hPainted RAL5010, total length 193 mm, inner diameter 217 mm To install the external fan it is necessary to remove the fan cover andremove the fan blade. If an extension cannot be used,the shaft has to be shortened. If ordered with a motor, the external fan can also be installedto be delivered. Please select version.

From €262.99*

Details

Frequency Inverter LS 0040S100-4EXFNS

Frequency inverter, 4.0 kW, 380V- 400V- 420V- 480V, IP66, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

€742.55*

Details

Engine options

Brakemotor-Option 4.0 kW – 4pol for M-Serie

Brakemotor-Option 4.0 kW – 4pol for helical gear reducer motors. Brake= 60 Nm 400V with rectifire. ! Only surcharge for the Motor and only available in conjunction with associated three-phase geared motor ! All product photos are non-binding examplesAll product photos are non-binding examples!

€519.11*

Details