To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Electric motor - MS2 71P- 0.55 kW- 4pol- B3

£82.96*

Prices incl. VAT plus shipping costs

Delivery time about 3-4 business days

Product number: 2X25061105A000

Shipping fees: Article + Packaging

Downloads

Product information "Electric motor - MS2 71P- 0.55 kW- 4pol- B3"

Three-phase motor, Motor in reduced size, Power= 0.55 kW, Speed= 4 pole

Type= B3, Shaft= 14 x 30 mm, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530),

Frequency= 50/60 Hertz, Efficiency class= IE2, Efficiency= 77.1 %. Paint= RAL 5010 (gentian blue),

Degree of protection = IP55, Temperature sensor = 3 x PTC-Thermistors, Weight= 6.5 kg, Terminal box position = top (rotatable),

Cable glands = 1 x M20, 1 x M16, Housing = Die-cast aluminum, Insulation class = F (155°C),

Ball bearing= SKF, C & U, o. Equivalent, Cooling= axial fan (plastic), Motor feet= can be screwed or unscrewed.

The Motor in reduced size is suitable for frequency converter use and for both directions of rotation.

According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified

specialist personnel. For modifications or special designs please send inquiry.

Helpful tips on electric motors can be found in the FAQ section. All product photos are non-binding examples!

We reserve the right to make technical changes.

Efficiency Class:	IE 2
Model:	Size reduced
Performance:	0,55 kW
Rotation speed:	1500 rpm / 4 polig
Shaft diameter:	14 mm
Size:	Reduziert
Type of construction:	B3

Properties "Electric motor - MS2 71P- 0.55 kW- 4pol- B3"

Efficiency Class:	IE 2
Model:	Size reduced
Performance:	0,55 kW
Rotation speed:	1500 rpm / 4 polig
Shaft diameter:	14 mm
Size:	Reduziert
Type of construction:	B3

Accesories

Flansch-Drehgeber Baugröße IEC 56 -112

Incremental rotary encoder Basic IEC71

Incremental encoder with mounting flange Power supply UB=5 – 24 VDC, Max. pulse frequency=≤ 100 kHz Max. speed=6000 min-1, Output signals=A90°B Pulses per revolution=1 – 64, Temperature range=-30 °C – +80 °C Signal level=U high ≥ UB – 0.7V @ Llast ≤ 10 mA, U low ≤ 0.7V @ L load ≤ 10 mA Load capacity of the outputs=≤ 30 mA @ UB=5 VDC ≤ 20 mA @ UB=24 VDC Interface Interface=HTL (Push-Pull), external evaluations=NPN, PNP Connection cable=PUR jacket 4x0.14 mm2 shielded, Cable length=standard 2 m Certificates=CE, RoHs Please select the flange size. All product photos are non-binding examples! Technical changes reserved.

From £251.53*

Absolute value rotary encoder AST IEC71

Absolute value rotary encoder AST IEC71

Power supply Ub=5 - 24V DC, Max. speed (rpm)=6000, External evaluations=RS422, Protection against polarity reversal=Yes, Measuring range=360°, Resolution (bit)=4 – 18, Linearity (25°C)=< 0.35°, Repeatability=≤ 0.1°, monoflop time typ/max (µs)=20, Temperature range=-30°C to +80°C, Protection class=standard IP55, Certificates=CE Please select the flange size. All product photos are non-binding examples! Technical changes reserved.

From £646.62*

Shaft couplings

Shaft couplings

Claw couplings guarantee power transmission that dampens torsional vibrations. Impacts caused by power machines operating unevenly. In contrast to elastic Couplings whose intermediate links are subjected to bending and are therefore faster wear, the elastic teeth (elastomers) are only exposed to compressive stress. This means that the elastomer coupling has the advantage of being able to withstand significantly higher loads. This gives the elastomer coupling the advantage of being able to withstand significantly higher loads. The elastomers deform under load and at high speeds. Please click on the image to select the product.

From £33.35*

Circuit breaker MS 0,55kW

Circuit breaker MS 0,55kW

Circuit breaker 0,55 kW (with a 4-pole engine) Depending on the equipment with or without insulating housing (please select). Connection type main circuit = screw connection Rated operational power at AC-3, 400 V Rated continuous current Iu=1-1,6 A Response current short-circuit release=19,2 A The Circuit breaker MS offer high current limit due to high breaking capacityoptimum protection of motors and other consumers up to 32 A. They are with main switchand separating function equipped; the rated current ranges from 0,1 bis 32 A. All product photos are non-binding examples! Technical changes reserved.

From £40.96*

Incremental Driveway FNC 50 H

Incremental Driveway FNC 50 H

Incremental encoder with torque support Power supply UB=4.75 – 30 VDC, max. pulse frequency=< 300 kHz Max. speed=5000 min-1, Output signals=90° shifted A and B, Pulses per revolution=1024, Temperature range=-20 °C - +85 °C Protection class=IP65, Connection cable=2 m, Hole 14 mm, If ordered with a motor, the encoder can also be delivered assembled. Please select version. All product photos are non-binding examples! Technical changes reserved.

From £146.17*

PTC thermistor tripping device

PTC thermistor tripping device

Kaltleiterauslösegerät, Motorschutz, PTC-Auswertung Operating voltage：AC 220V Allowable volt tolerance：±20% Frequency：50～60Hz Self-consuming power：<0.8VA Allowable environment temperature：-30～70℃ Rated current of switch：7A Operating resistance：3KΩ (1±10%) Restoring resistance：1500～1800Ω Weight：0.2Kg

£40.06*

Frequency inverter LS 008M100

Frequency inverter LS 008M100

Frequency inverter , 0.75 kW, 230V, 4.2A, IP20, EMC filter integrated - EMC filter C2- Potentiometer for speed control- Attachment to mounting plates or DIN rail- Side-by-side installation possible (2 mm distance between the FU)- Easy connection via RJ45 port- Standard IO: 3x DI, 1x DO, 1x AI (0-10V), 1x AO (0-10V)- Brake chopper for 1.5kW and 2.2kW versions- Overload capacity 150% for 1 min- Programming with DriveView9 operating software via RJ45 connection on the M100(Advanced only! The standard version does not have an RJ45 interface! Please select version.) Excerpt from spec. Features:- DC braking- Jog operation- 3-wire operation- Dwell operation (dwell time operation)- Slip compensation- PID control- Energy saving operation- Speed search- Automatic restart 0.75kW frequency converter , single-phase (1 x 220 / 230 / 240 V)

From £129.76*

Heating tape 56-90

Heating tape 56-90

Heating band for a standstill heater for electric motors of size 56-63-71-80-90 The standstill heater is used to prevent the formation of condensation during breaks in operation.

£101.49*

External fan unit size 71

External fan unit size 71

External fan, External fan unit, Motor size 71 Isoclass F, Protection class IP56, Weight 2.7 kg, Multivoltage. 1x230 V-50 Hz, 35 watts, 0.19 A, 2950 rpm, 52 m3/h, capacitor 3µF1x240 V-60 Hz, 45 watts, 0.21 A, 3500 rpm, 52 m3/h, capacitor 3µF3x230/400 V-50 Hz, 30 watts, 0.19 A/0.12 A, 2900 rpm, 52 m3/h3x 254/460 V-60 Hz, 40 watts, 0.19/0.11, 3500 rpm, 52 m3/hPainted RAL5010, total length 185 mm, inner diameter 136 mm To install the external fan it is necessary to remove the fan cover andremove the fan blade. If an extension cannot be used,the shaft has to be shortened. If ordered with a motor, the external fan can also be installedto be delivered. Please select version.

From £148.13*

Rain cover BG71

Rain cover BG71

Fan cover with rain protection roof for Electric motors in size 71. When ordering with an Electric motor, the rain protection cover is mounted directly on the JS Electric motor.

£32.61*

Cam switch left-zero-right

Cam switch left-zero-right

Cam switch up to 25A left-zero-right Reversing switch suitable for outdoor use Description: Rated current= 25A, Operating voltage= 400V, Housing= Polycarbonate, Protection class= IP 65, Switching angle= 60°L - 0 - R, Dimensions: 113 x 113 x 135 mm

£60.55*

Motor-slide-plate IEC63-80

Motor-slide-plate IEC63-80

Electric motor slide plate in size IEC 63 to 80 Dimensions: 210 x 195 x 33mm (LxWxH)Weight capacity: 25kgWeight: approx. 2.6kgInstallation position: horizontal and vertical Electric motor slide bases are used to compensate for vibrations and friction that can lead to either slipping or unnecessary wear on electricmotors and belts. They will allow you to precisely adjust the mounted motors lateral position to the millimetre. The life span of the equipmentwill be maximised, therefore decreasing costs and increasing profits.All product photos are non-binding examples!

£57.80*

Motor-slide-plate IEC63-100

Motor-slide-plate IEC63-100

Electric motor slide plate in size IEC 63 to 100 Dimensions: 270 x 195 x 33mm (LxWxH)Weight capacity: 44kgWeight: approx. 3kgInstallation position: horizontal and vertical Electric motor slide bases are used to compensate for vibrations and friction that can lead to either slipping or unnecessary wear on electricmotors and belts. They will allow you to precisely adjust the mounted motors lateral position to the millimetre. The life span of the equipmentwill be maximised, therefore decreasing costs and increasing profits.All product photos are non-binding examples!

£64.71*

Slide rails sice 63/71

Slide rails sice 63/71

Motor mounting rails for size 63 - 71 Electric motors, with adjustable clamping blocks,made of galvanized sheet steel. Total length: 375 mmSlide length: 305 mmWeight: approx. 1.5 kgMotor slide rails are used for belt drive applications. The motor slide railsare made of a steel structure and galvanized. They enable the construction of the drivea simple alignment of the motor to the pulley. Slide rails are suitable for almost everyoneMotor types and are characterized by a flat and compact design.Delivery is in pairs. All product photos are non-binding examples!

£42.70*

Flansch-Drehgeber Baugröße IEC 56 -112

Incremental encoder Nova+ IEC71

Power supply Ub=5 - 24V DC, Max. pulse frequency (kHz)=≤ 100, Max. speed (rpm)=6,000 (1,024 pulses), 3,000 (2,048 pulses), Output signals=A+B, -AB/90°, Pulses / Revolution=1 - 2,048, Interface=HTL (Push-Pull), TTL, Temperature range=-30°C to +80°C, External evaluations=NPN, PNP, RS422, Protection class=standard IP55, Connection cable PUR jacket 6 x 0.14 shielded, Certificates=CE, Please select the flange size. All product photos are non-binding examples! Technical changes reserved.

From £340.46*

Flansch-Drehgeber Baugröße IEC 56 -112

Incremental rotary encoder Basic IEC71

Incremental encoder with mounting flange Power supply UB=5 – 24 VDC, Max. pulse frequency=≤ 100 kHz Max. speed=6000 min-1, Output signals=A90°B Pulses per revolution=1 – 64, Temperature range=-30 °C – +80 °C Signal level=U high ≥ UB – 0.7V @ Llast ≤ 10 mA, U low ≤ 0.7V @ L load ≤ 10 mA Load capacity of the outputs=≤ 30 mA @ UB=5 VDC ≤ 20 mA @ UB=24 VDC Interface Interface=HTL (Push-Pull), external evaluations=NPN, PNP Connection cable=PUR jacket 4x0.14 mm2 shielded, Cable length=standard 2 m Certificates=CE, RoHs Please select the flange size. All product photos are non-binding examples! Technical changes reserved.

From £251.53*

Absolute value rotary encoder AST IEC71

Absolute value rotary encoder AST IEC71

Power supply Ub=5 - 24V DC, Max. speed (rpm)=6000, External evaluations=RS422, Protection against polarity reversal=Yes, Measuring range=360°, Resolution (bit)=4 – 18, Linearity (25°C)=< 0.35°, Repeatability=≤ 0.1°, monoflop time typ/max (µs)=20, Temperature range=-30°C to +80°C, Protection class=standard IP55, Certificates=CE Please select the flange size. All product photos are non-binding examples! Technical changes reserved.

From £646.62*

Shaft couplings

Shaft couplings

Claw couplings guarantee power transmission that dampens torsional vibrations. Impacts caused by power machines operating unevenly. In contrast to elastic Couplings whose intermediate links are subjected to bending and are therefore faster wear, the elastic teeth (elastomers) are only exposed to compressive stress. This means that the elastomer coupling has the advantage of being able to withstand significantly higher loads. This gives the elastomer coupling the advantage of being able to withstand significantly higher loads. The elastomers deform under load and at high speeds. Please click on the image to select the product.

From £33.35*

Circuit breaker MS 0,55kW

Circuit breaker MS 0,55kW

Circuit breaker 0,55 kW (with a 4-pole engine) Depending on the equipment with or without insulating housing (please select). Connection type main circuit = screw connection Rated operational power at AC-3, 400 V Rated continuous current Iu=1-1,6 A Response current short-circuit release=19,2 A The Circuit breaker MS offer high current limit due to high breaking capacityoptimum protection of motors and other consumers up to 32 A. They are with main switchand separating function equipped; the rated current ranges from 0,1 bis 32 A. All product photos are non-binding examples! Technical changes reserved.

From £40.96*

Incremental Driveway FNC 50 H

Incremental Driveway FNC 50 H

Incremental encoder with torque support Power supply UB=4.75 – 30 VDC, max. pulse frequency=< 300 kHz Max. speed=5000 min-1, Output signals=90° shifted A and B, Pulses per revolution=1024, Temperature range=-20 °C - +85 °C Protection class=IP65, Connection cable=2 m, Hole 14 mm, If ordered with a motor, the encoder can also be delivered assembled. Please select version. All product photos are non-binding examples! Technical changes reserved.

From £146.17*

PTC thermistor tripping device

PTC thermistor tripping device

Kaltleiterauslösegerät, Motorschutz, PTC-Auswertung Operating voltage：AC 220V Allowable volt tolerance：±20% Frequency：50～60Hz Self-consuming power：<0.8VA Allowable environment temperature：-30～70℃ Rated current of switch：7A Operating resistance：3KΩ (1±10%) Restoring resistance：1500～1800Ω Weight：0.2Kg

£40.06*

Frequency inverter LS 008M100

Frequency inverter LS 008M100

Frequency inverter , 0.75 kW, 230V, 4.2A, IP20, EMC filter integrated - EMC filter C2- Potentiometer for speed control- Attachment to mounting plates or DIN rail- Side-by-side installation possible (2 mm distance between the FU)- Easy connection via RJ45 port- Standard IO: 3x DI, 1x DO, 1x AI (0-10V), 1x AO (0-10V)- Brake chopper for 1.5kW and 2.2kW versions- Overload capacity 150% for 1 min- Programming with DriveView9 operating software via RJ45 connection on the M100(Advanced only! The standard version does not have an RJ45 interface! Please select version.) Excerpt from spec. Features:- DC braking- Jog operation- 3-wire operation- Dwell operation (dwell time operation)- Slip compensation- PID control- Energy saving operation- Speed search- Automatic restart 0.75kW frequency converter , single-phase (1 x 220 / 230 / 240 V)

From £129.76*

Heating tape 56-90

Heating tape 56-90

Heating band for a standstill heater for electric motors of size 56-63-71-80-90 The standstill heater is used to prevent the formation of condensation during breaks in operation.

£101.49*

External fan unit size 71

External fan unit size 71

External fan, External fan unit, Motor size 71 Isoclass F, Protection class IP56, Weight 2.7 kg, Multivoltage. 1x230 V-50 Hz, 35 watts, 0.19 A, 2950 rpm, 52 m3/h, capacitor 3µF1x240 V-60 Hz, 45 watts, 0.21 A, 3500 rpm, 52 m3/h, capacitor 3µF3x230/400 V-50 Hz, 30 watts, 0.19 A/0.12 A, 2900 rpm, 52 m3/h3x 254/460 V-60 Hz, 40 watts, 0.19/0.11, 3500 rpm, 52 m3/hPainted RAL5010, total length 185 mm, inner diameter 136 mm To install the external fan it is necessary to remove the fan cover andremove the fan blade. If an extension cannot be used,the shaft has to be shortened. If ordered with a motor, the external fan can also be installedto be delivered. Please select version.

From £148.13*

Rain cover BG71

Rain cover BG71

Fan cover with rain protection roof for Electric motors in size 71. When ordering with an Electric motor, the rain protection cover is mounted directly on the JS Electric motor.

£32.61*