Electric motor IE4 315L2-2, 200 kW, 2 pol, B5
Product information "Electric motor IE4 315L2-2, 200 kW, 2 pol, B5"
Electric motor, power=200 kW, speed=3000 rpm, design=B5
Shaft=65 x 140 mm, voltage=3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), frequency=50/60 Hertz.
Efficiency class=IE4, efficiency=96.5%, paint finish=RAL 5010 (gentian blue), protection class=IP55, temperature sensor=3 x PTC thermistors,
Weight=1228.0 kg, operating mode=S1- 100% ED, terminal box position=top, housing=grey cast iron, insulation class=F (155°C), with relubrication device,
Ball bearing=SKF or equivalent, fixed bearing on A-side, cooling=axial fan (plastic), motor feet=permanently cast (if available).
The motor bearing is designed for clutch operation. For belt drive, we recommend reinforced cylindrical roller bearings
The electric motor is for the Frequency inverter - Use and suitable for both directions of rotation.
According to VDE 0105 and IEC 364, all work on the electric drive must only be carried out by qualified
For modifications or special designs, please send an inquiry.
All product photos are non-binding examples! Technical changes reserved.
| Ambient temperature: | 40 °C |
|---|---|
| Direction of rotation: | Left, Right |
| Efficiency Class: | IE 4 |
| Engine protection: | PTC thermistor 3-fold |
| Frequency: | 50 Hz, 60 Hz |
| Installation altitude: | 1000 m |
| Kühlungsart: | IC 411 |
| Operating mode: | S1 |
| Performance: | 200 kW |
| Protection class: | IP55 |
| Rotation speed: | 3000 rpm / 2 polig |
| Series: | new series |
| Shaft diameter: | 65 mm |
| Shaft dimensions: | 65 x 140 mm |
| Tension: | 3 x 400/690 V |
| Type of construction: | B5 |
| Ambient temperature: | 40 °C |
|---|---|
| Direction of rotation: | Left, Right |
| Efficiency Class: | IE 4 |
| Engine protection: | PTC thermistor 3-fold |
| Frequency: | 50 Hz, 60 Hz |
| Installation altitude: | 1000 m |
| Kühlungsart: | IC 411 |
| Operating mode: | S1 |
| Performance: | 200 kW |
| Protection class: | IP55 |
| Rotation speed: | 3000 rpm / 2 polig |
| Series: | new series |
| Shaft diameter: | 65 mm |
| Shaft dimensions: | 65 x 140 mm |
| Tension: | 3 x 400/690 V |
| Type of construction: | B5 |
Accesories
