DV172-63-4-0,12 kW-181 rpm Parallel shaft gearmotor
Downloads
- JS- DV172 / DV173- Maßzeichnung / Data sheet
- JS- Elektromotor- MX631- Datenblatt / Data sheet
- JS- Elektromotor- MS2 631- Datenblatt / Data sheet
- JS- DV172 / DV173- MX63- Step
- JS- DV-Serie- Katalog / Catalog
- JS- DV-Serie- Betriebsanleitung
- JS- DV-series- Operating instructions
- JS- Elektromotoren- Betriebsanleitung
- JS- Electric motors- Operation instructions
Product information "DV172-63-4-0,12 kW-181 rpm Parallel shaft gearmotor"
Parallel shaft gearmotor with IEC flange between gearbox and Electro motor
Voltage= 3 x 230/400 V-50 Hz, 3 x 400/690 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 0,12 kW, Speed (n²)= 181 rpm, Ratio (i)= 7,74, Torque (M²)= 6 Nm,
Operating factor (fs)= 30,6, Type= B3, Hollow shaft= 30 mm, Weight= 19 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The bevel gear can be operated in both directions and contains an oil filling on delivery.
In according to the VDE 0105 bzw. IEC 364 all work on the electric drive must only becarried out by qualified
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructions
This drive is a custom-made product. A resignation or revocation of the purchase is excluded!
All product photos are non-binding examples!
| Performance: | 0,12 kW |
|---|---|
| Rotation speed: | 101 to 200 rpm |
| Series: | D-series |
| Shaft diameter: | 30 mm |
| Torque: | up to 10 Nm |
| Performance: | 0,12 kW |
|---|---|
| Rotation speed: | 101 to 200 rpm |
| Series: | D-series |
| Shaft diameter: | 30 mm |
| Torque: | up to 10 Nm |