CMRV040+V02 632- 4- 0.18 kW- 11.5-58 rpm Worm gear variable speed motor
Product information "CMRV040+V02 632- 4- 0.18 kW- 11.5-58 rpm Worm gear variable speed motor"
worm variable speed gear motor, Power= 0.18 kW, Speed= 11.5 - 58 rpm,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530),
Protection type= IP55, Iso class= F (155°C), Operating mode= S1, Duty cycle= S1- 100%, Total length= approx. 415 mm,
Hollow shaft= 18 mm, Motor Speed= 4 poles, Gear ratio with adjustment unit (i)= 24 - 123
Gear ratio only worm gear (i)= 15, Torque= 17 Nm - 32 Nm, Service factor ( f.s.)= 1.
Terminal box= above (rotatable), Weight= 12 kg, Color= RAL 5010 (gentian blue),
Temperature sensor= 3 x PTC thermistor, Gear housing = aluminum, Ball bearing = SKF, C&U or equivalent,
Cooling=axial fan (plastic). The drive complies with IEC 60034-30:2008,
is suitable for both directions of rotation and includes an oil filling upon delivery. Open hollow shafts are included
to be closed with a cover cap. This can be ordered under the “Accessories” section. According to VDE 0105
or IEC 364, all work on the electric drive must only be carried out by qualified specialist personnel.
As is usual with variable speed gearboxes, speed control by turning the handwheel is only permitted during operation!
A change in speed while at a standstill can lead to damage to the continuously variable adjustment unit.
All product photos are non-binding examples! Technical changes reserved.
| Control range: | here. 11.5 bis 58 rpm |
|---|---|
| Performance: | 0,18 kW |
| Series: | CMRV-series |
| Shaft diameter: | 18 mm |
| Control range: | here. 11.5 bis 58 rpm |
|---|---|
| Performance: | 0,18 kW |
| Series: | CMRV-series |
| Shaft diameter: | 18 mm |
Accesories
