CMRV040+V02-632- 4- 0,18 kW- 3,5-17,5 rpm Worm gear variable speed motor

£548.90*

Delivery time about 3-4 business days

Product number:
C040V02803100500A000TM
Shipping fees:
Article + Packaging
Product information "CMRV040+V02-632- 4- 0,18 kW- 3,5-17,5 rpm Worm gear variable speed motor"

Worm variable speed gear motor, Power= 0.18 kW, Speed= 3.5 - 17.5 rpm,

Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530),

Protection type= IP55, Iso class= F (155°C), Operating mode= S1, Duty cycle= S1- 100%, Total length= approx. 415 mm,

Hollow shaft = 18 mm, Motor speed = 4 poles, Translation with adjustment unit (i) = 80 - 410 

Transmission only worm gear (i) = 50, Torque = 43 Nm - 60 Nm, Service factor ( f.s.)= 1, 

Terminal box= above (rotatable), Weight= 12 kg, Color= RAL 5010 (gentian blue), 

Temperature sensor= 3 x PTC Thermistor, Gear housing = Aluminum, Ball bearing = SKF, C&U or equivalent,

Cooling= axial fan (plastic). For technical reasons, the variable speed worm gear motor should

cannot be operated with a frequency converter. The drive corresponds to IEC 60034-30:2008,

is suitable for both directions of rotation and is supplied with an oil filling. Open hollow shafts are to be sealed with

a cover cap. This can be ordered under the heading "Accessories". According to VDE 0105 and IEC 364, all work on the electric drive may only be carried out by qualified personnel.

As usual with variable speed gears, speed control by turning the hand wheel is only permitted during operation!

A change in speed while stationary can damage the stepless adjustment unit.

All product photos are non-binding examples! Technical changes reserved.

Properties "CMRV040+V02-632- 4- 0,18 kW- 3,5-17,5 rpm Worm gear variable speed motor"
Control range: here. 3 bis 20 rpm
Performance: 0,18 kW
Series: CMRV-series
Shaft diameter: 18 mm

Accesories

slide 5 to 7 of 7